In cases where the probes for reading memory from the server side were not
successful (=not vulnerable) the TCP connection was not shut down properly --
leading to and undefined state and probably causing problems to a consecutive
check. The server side then assumably from time to time just didn't return
anything which caused a integration test (t/08_isHTML_valid.t) to fail
randomly.
This PR properly terminates the TCP socket connection. Also, as sending the
close notification before closing the socket was duplicated in testssl.sh
that went to a separate function.
See comment in #1375:
https://github.com/drwetter/testssl.sh/pull/1375#issuecomment-554424814
This PR enhances support for the latest versions of OpenSSL and LibreSSL.
The development version of OpenSSL at https://github.com/openssl/openssl/ is version 3.0.0-dev. So, checks for OpenSSL versions need to support this version as well. At the same time, the latest versions of LibreSSL are 3.0.0, 3.0.1, and 3.0.2, so version number alone will no longer be sufficient to distinguish between OpenSSL and LibreSSL.
In addition to checks for these new version numbers, this PR addresses a couple of other issues:
- In LibreSSL, the "$OPENSSL ciphers" command will not accept any protocol version other than "-tls1" as a parameter (and even including "-tls1" as an option is described as "deprecated"). So, this PR ensures that "$OPENSSL ciphers" is not passed any protocol version option other than "-tls1" is LibreSSL is being used.
- In OpenSSL 3.0.0-dev, the "$OPENSSL dgst" can no longer be used to compute HMACs, but a new "$OPENSSL mac" function has been created. So, this PR changes hmac() to use "$OPENSSL mac" with OpenSSL 3.0.0-dev.
Note that I have not tested the modified version of sub_session_resumption(). I am just assuming that OpenSSL 3.0.0-dev works the same as OpenSSL 1.1.1 and that all versions of LibreSSL work the same as OpenSSL 1.1.0 and earlier.
When tls_sockets() is used for run_protocols(), for each protocol version the results will indicate whether the server responded to a ClientHello for that protocol version with (1) a ServerHello for that same protocol version, (2) a ServerHello for a different (hopefully lower) protocol version, or (3) a handshake failure.
Currently, however, run_prototest_openssl() does not distinguish between cases in which the server responds with a ServerHello for a different (hopefully lower) protocol version and cases in which the server responds with a handshake failure. This PR changes run_prototest_openssl() so that it distinguishes between these two cases (as long as $OPENSSL supports the protocol version specified in the ServerHello).
Making use of the additional information provided by run_prototest_openssl(), this PR also modifies run_protocols() to check that version negotiation was performed correctly even if $using_sockets is false.
Note that one special case needed to be addressed. If an SSLv3-only server is being tested using an $OPENSSL that does not support SSLv3, then $latest_supported must not be set to SSLv3. In the case of a server like this, it is possible that support for SSLv3 will be determined by determine_optimal_sockets_params(), which will cause run_protocols() to report that the server supports SSLv3, even though $OPENSSL does not support SSLv3 and testing is being performed in --ssl-native mode. If $latest_supported were set, then later tests in run_protocols() would incorrectly report a version negotiation failure, even though the failure to connect was a result of a limitation of $OPENSSL rather than a fault of the server.
When running in debugging mode, HAS_DIG and friends was
still false as check_resolver_bins() was called too late.
This amends basically bac0f66112 .
In cases where a certificate has two CNs, the output contained
a linefeed. This replaces the line feed by a space.
This fixes a bug e.g. when supplying a proxy by a DNS name, testssl couldn't resolve the name as the HAS_ variables initialized by ``check_resolver_bins()`` was done later than ``check_proxy()``.
The patch just puts ``check_resolver_bins()`` earlier in "main"
run_prototest_openssl() currently calls "$OPENSSL s_client" twice, once with $PROXY and once without. The problem is that the results of the first call are just ignored. This commit changes run_prototest_openssl() so that the attempt without $PROXY is only tried if the first attempt was unsuccessful.
If --ssl-native is being used and the server supports SSLv2, but does not support any SSLv2 ciphers, there is a missing line break after the warning message is printed.
run_prototest_openssl() currently checks only stdout for the string "no cipher list", which is an indication that the server supports SSLv2, but no ciphers for that protocol. However, the output that includes "no cipher list" is sent to stderr.
This PR fixes a minor problem with run_protocols() in "--ssl-native" mode if $OPENSSL does not support TLS 1.3. Currently, the warning message that $OPENSSL does not support a protocol is printed when run_prototest_openssl() is called. This causes a problem for the output if $OPENSSL does not support TLS 1.3, since the run_prototest_openssl() is called before the results for TLS 1.2 are printed. The result is something like this:
SSLv2 not offered (OK)
SSLv3 not offered (OK)
TLS 1 offered (deprecated)
TLS 1.1 offered (deprecated)
Local problem: /home/cooper/Desktop/testssl.sh/bin/openssl.Linux.x86_64 doesn't support "s_client -tls1_3"
TLS 1.2 offered (OK)
TLS 1.3 NPN/SPDY not offered
ALPN/HTTP2 http/1.1 (offered)
When processing a command line for parallel mass testing, create_mass_testing_cmdline() did not account for the newer shortened versions of the output file options: -oj, -oJ, -oC, and -oH. This caused the command line for the child processes to be incorrect.
If a server offers TLS 1.3 only and the cipher order is server side this commit changes the severity level to INFO.
Also it changes nope to no in two places
This commit addresses the comments in #1205. If a server only supports TLS 1.3, then it is not considered an issue if the server does not enforce a cipher order. However, if the server does not support a cipher order for TLS 1.2 and below, then that is an issue, even if the server does support a cipher order for TLS 1.3.
This PR is an attempt to fix#1163 by running separate tests for a server cipher order preference to TLSv1.3 and for SSLv3 - TLSv1.2.
If the server supports TLSv1.3, then a test is performed to determine whether the server enforces a cipher order to TLSv1.3. A separate test is performed for SSLv3 - TLSv1.2 unless it is known that the server does not support any of these protocols.
If the server enforces a cipher order for SSLv3 - TLSv1.2, but not for TLSv1.3, then cipher_pref_check() is not called for TLSv1.3, since cipher_pref_check() is intended to show the cipher order that the server enforces. As TLSv1.3 will be the negotiated protocol if it is supported, the negotiated cipher for TLSv1.3 will already be presented.
This PR still has one major flaw, which may create a problem when testing a TLSv1.3-only server. If run_protocols() is run before run_server_preference(), then everything will be okay, as run_server_preference() will be able to determine that SSLv3 - TLSv1.2 are not supported. However, if run_server_preference() is run by itself, run_server_preference() will not know that SSLv3 - TLSv1.2 are not supported and so it will try to determine whether the server enforces a cipher preference order for these protocols. The attempt to connect to the server will fail, but at the moment run_server_preference() doesn't know whether the failure is because the server does not support SSLv3 - TLSv1.2 or because the server supports at least one of these protocols, but does not support any ciphers in $list_fwd. At the moment, run_server_preference() incorrectly flags an error.
One option would be to perform additional tests against the server in this case to determine the reason for the connection failure. Another option would be to have some code that is always run earlier, such as determine_optimal_proto(), test whether a server that supports TLSv1.3 supports any earlier protocols (SSLv3 - TLSv1.2).
In run_drown(), $jsonID is set to "DROWN" and most calls to fileout() are of the form
fileout "$jsonID" ...
However, one call is written as
fileout "DROWN" ...
This PR changes this one call to be consistent with the others. This does not change the functionality of the program.
At the moment, $do_starttls is initialized to true in initialize_globals() and then it is set to true again in parse_cmd_line() if the --starttls command line option is used. Presumably the intention was to set $do_starttls to false in initialize_globals().
This PR fixes a minor bug in parse_tls_serverhello(). In some cases the server's entire response is not retrieved. In these cases, it is possible that the response from the server ends with a portion of a handshake message.
The loop at the beginning of parse_tls_serverhello() extracts the various handshake and alert messages from the server's response. If it gets to the end of the response, and what is at the end is not a complete message, it should just ignore that fragment and break out of the loop. At the moment, however, parse_tls_serverhello() just continues in the loop rather than breaking out. This has not been a problem up to now, since $msg_len is usually set to a positive value from a previous iteration of the loop, which causes the loop to end.
In the case of the server identified in #1353, however, $msg_len is 0 and so the continue rather than break results in an endless loop.
Dirk Wetter
David Cooper
Alexander Naumov
a666
Niklas
Scott Johnson