This PR fixes#1223 by checking whether the stapled OCSP response from the server is an error message.
Another way to fix#1223 would be to just change line 8510 to:
```
if grep -a "OCSP Response Status" <<< "$ocsp_response_status" | grep -q successful || \
[[ "$ocsp_response" =~ Responder\ Error: ]]; then
```
However, I believe this alternative would lead to confusing results, testssl.sh would print
offered, error querying OCSP responder (tryLater)
I'm not sure whether it makes sense to say "offered" when the stapled response that is provided is just an error message, but I think it is important to make clear that the error response was received from the TLS server, and that it wasn't testssl.sh that tried querying the OCSP responder.
.. for HTML check after introducing "Pre-tests"
In ~/t/32_http.t a statement failied because the debug output has deliberately a line
"Pre-test: No 128 cipher limit bug."
This and ONE additional LF are now being filtered before comparing.
Unclear why the other additional line introduced
makes no problems.
A private ~/.digrc overrides the commandline options from dig. So
we need to make sure that the output is still what is expected.
This commit addresses it by adding additional parameters, mostly
to existing awk commands so that only the fields we want are returned.
see #1220
- write to log file if there's a SERVER_SIZE_LIMIT_BUG
- write to screen if $DEBUG > 1
It's 128 + 00ff when the CISCO ACE hiccups (#1204)
Some minor improvements like removing redundant double quotes
As in #1219 reported it was possible to specify e.g.
--csv and --csvfile which was not intended.
This PR detects those conflicting options and
exists.
Also it removes 637812a022
"&& JSONHEADER=false" as it seems errorneous.
This commit fixes a the regression "Session Ticket RFC 5077 hint missing/incomplete" #1218.
Reason was that in some case where the ticket lifetime hint was not restrieved before, later
$OPENSSL s_client -connect with -cipher ALL:COMPLEMENTOFALL didn't get the ticket either.
Just using "$OPTIMAL_PROTO" instead of -cipher ALL:COMPLEMENTOFALL fixed it in the cases
tested so far.
Then a global variable is instroduced -- TLS_TICKETS. Which keeps in any case the
state whether session tickets are supported. This is being used to fix#1089. It
remains a bit unclear what is meant in https://tools.ietf.org/html/rfc5077#section-5.6
by "TLS clients MAY be given a hint of the lifetime of the ticket". We use this information
to chck for resumption by ticket which seems realistically the best solution.
Sessin resumption was also made a bit more reliably: The ServerHello is now
being tested for "New" also. If this and "Reused" wasn't detected, an error
is raised.
In general we could do better in keeping and reusing information of a ServerHello
in TMPDIR.
There is currently a bug in determine_optimal_proto_sockets_helper(). In two places there is code of the form:
tls_sockets ...
if [[ $? -eq 0 ]]; then
...
elif [[ $? -eq 2 ]]; then
...
fi
This code does not work as intended since the second check ("elif [[ $? -eq 2 ]]") is actually comparing the results of the first check to 2 rather than the results of the call to tls_sockets().
This PR fixes that problem and also speeds up the code. Since tls_sockets() sets $DETECTED_TLS_VERSION to the protocol version that was negotiated, there is no need to scan $TEMPDIR/$NODEIP.parse_tls_serverhello.txt for this information.
* changed = to ==
* fixed emphasize errors in emphasize_stuff_in_headers()
* add new debian version
* prospectively add Alt-Svc header, see #1209 (won't show up in output yet)
In order to handle better Cisco ACE loadbalancers (almost extinct species) which
have a problem with ClientHellos >127 ciphers we have had introduced a variable which
needs to be filled better with some sense.
This commit does that by introducing the function determine_sizelimitbug() which
is called in lets_roll().
It also removes then redundant code in cipher_pref_check().
Open:
* handle run_grease()
* do we want this information at least in a logfile
* or maybe eben on screen?
See also #1202 .
For non-EC public key algorithm of the server certificate
the terminal output contained the algorithm but not the
file out put. This PR fixes that, see also #1187 and puts
the public key algorithm first in the cert_keySize -- also
for EC cerificates.
In addition it fixes the recognition of ECDSA certificates
which were detected as DSA certificates (order in case
statement).
Also there were in a few double sqaure brackets an assignment operator
'=' instead of a test operator '=='
There were a few, mostly less common ciphers in this check missing.
This commit adds them and fixes#208.
It also removes redundant quotes in double square brackets and
updates documentation for determine_optimal_proto().
- Darwin doesn't build with -static (removed; file name suffix changed to "dynamic" in this case)
- Darwin has a different openssldir (/private/etc/ssl)
- script doesn't fail any more at make clean step in case there is no Makefile yet
- Darwin 64 bit compilation needs ./Configure instead of ./config and an explicit reference to darwin64-x86_64-cc
This is the last fix for #1087.
It determines STARTTLS_OPTIMAL_PROTO (unless --ssl-native is being used) with
sockets per default which removes cases where an openssl s_client
connect using STARTTLS failed with the initial message 'doesn't seem to be a TLS/SSL
enabled server' and prompt 'Really proceed ? ("yes" to continue)' now shouldn't
happen in those cases anymore.
To not have redundant code determine_optimal_proto_sockets_helper() is being
used for not STARTTLS and plain TLS/SSL.
In addition it looked like this determine_optimal_proto() was not always called in
the beginning when a STARTTLS scan was requested. Instead determine_service()
contained an openssl s_client connect called which was the wrong place and thus
removed. Also now determine_optimal_proto() also for STARTTLS will always being called.
The information on 64 Block ciphers using SSLv2 in the SWEET32
paper is sparse. Maybe becuase SSLv2 is the bigger problem.
For completeness also SSLv2 ciphers were added to the SWEET32 check.
It fixes finally #613.
Also with --ssl-native when no ciphers or only a handlful of ciphers
are supplied by openssl there's a "Local problem" warning issued and
the test aborted as the results would make much sense otherwise.
A few peices of documenation of parameters and return conditions
for sslv2_sockets() and has_server_protocol() was added.
This is a minor bug when performing run_server_preference() if the server cannot handle ClientHello messages with more than 128 ciphers (i.e., $SERVER_SIZE_LIMIT_BUG is true) and the server supports at least one cipher in 'CAMELLIA:IDEA:KRB5:PSK:SRP:aNULL:eNULL'.
The problem is that `$OPENSSL s_client` is called with a cipher list such as
ECDHE-RSA-AES256-GCM-SHA384:CAMELLIA256-SHA:AES256-SHA256
then
ECDHE-RSA-AES256-GCM-SHA384:CAMELLIA256-SHA:AES256-SHA256:-CAMELLIA256-SHA
then
ECDHE-RSA-AES256-GCM-SHA384:CAMELLIA256-SHA:AES256-SHA256:-CAMELLIA256-SHA:-AES256-SHA256
and finally
ECDHE-RSA-AES256-GCM-SHA384:CAMELLIA256-SHA:AES256-SHA256:-CAMELLIA256-SHA:-AES256-SHA256:-ECDHE-RSA-AES256-GCM-SHA384
The last call to $OPENSSL s_client produces an error since the list of ciphers to send is empty, and this results in connectivity_problem() being called to print a "openssl s_client connect problem" warning.
This PR fixes the problem by constructing a list of ciphers to test for and by not calling $OPENSSL s_client if the list is empty.
As Dirk commented in #1199, TLS_GOSTR341094_RSA_WITH_28147_CNT_MD5 uses an RSA certificate, not a GOST certificate. So, this PR moves that cipher suite (0xff, 0x00) from the GOST list to the RSA list.
According to etc/cipher-mapping.txt, TLS_GOSTR341094_RSA_WITH_28147_CNT_MD5 uses RSA for both authentication and key exchange, so this PR places it on the list of cipher suites that uses RSA for encryption rather than signatures.
With OpenSSL 1.1.0 (and maybe other versions), the `ciphers` function lists many cipher suites that are not actually supported by the `s_client` option. This PR fixes that by using the `-s` option whenever `$OPENSSL ciphers` is used to obtain a list of cipher suites supported by OpenSSL. According to https://www.openssl.org/docs/manmaster/man1/ciphers.html:
```
-s
Only list supported ciphers: those consistent with the security level, and minimum and
maximum protocol version. This is closer to the actual cipher list an application will
support.
```
When the `-s` option is used along with `-tls1`, OpenSSL 1.1.0 will not list any ciphers that only work with TLSv1.2. So, `prepare_debug()` needed to be changed to correctly populate `ossl_supported_tls`, which is supposed to be a list of all non-SSLv2 ciphers supported by the server.
LibreSSL issues an "unknown option" error if the `-s` option is provided, so the `-s` option is only included in the command line if `$OPENSSL` has been determined to support it.
This PR is needed so that `prepare_debug()` can correctly determine which cipher suites are or are not supported by `$OPENSSL`.
This PR removes an extra call to `$OPENSSL s_client` in `get_server_certificates()` and it also changes `get_server_certificates()` to not collect extensions when SNI is not being provided.
This PR modifies get_server_certificate() to use tls_sockets() rather than $OPENSSL for finding certificates using SSLv3 - TLSv1.2, unless $SSL_NATIVE is true. Using tls_sockets() allows testssl.sh to find certificates used by the server even if the server is only using cipher suites not supported by $OPENSSL. This may happen, for example, if the server only supports TLS_ECDHE_ cipher suites with curve X25519 and a version of OpenSSL prior to 1.1.0 is being used. A less likely possibility would be if the server had a certificate with a DH key, and a newer version of OpenSSL that does not support TLS_DH_ cipher suites is being used.
Since tls_sockets() cannot be used to obtain session tickets from the server, an additional test for session ticket lifetime needed to be added.
In order to reduce the number of times the server needs to be queried for certificates, this PR bundles the testing in a similar way to what is already done to test for cipher suites. Currently, each call to get_server_certificate() only tests for one type of certificate. This PR has each call test for more than one type of certificate. For example, one call is made to test for ECDSA, ECDH, DH, DSA, and GOST certificates. If the test is unsuccessful, then the server has none of these certificates. If the test finds a certificate (e.g., an ECDSA) certificate, then another test is run looking for the remaining types (ECDH, DH, DSA, and GOST) until a test is unsuccessful.
For most servers, this will reduce the number of calls to get_server_certificate() from 8 or 9 to 4 or 6.
Dirk
David Cooper
Andrew Bonney
Bodo Bellut
Dominik Herrmann
David Cooper