The commit updates the test for the "Visibility Information" certificate extension used in the ETSI Enterprise Transport Security protocol.
The main change is to support OpenSSL 3.0.0, which prints more information about subject alternative names that are encoded as otherName. For otherName types for the OpenSSL has no information, it prints "otherName: <OID>::<unsupported>" rather than just "otherName: <unsupported>". So, testssl.sh needs to account for the possibility that the OID for the visibility information certificate extension will be printed.
This commit also updates the reference for this extension and changes the name of the function from etsi_etls_visibility_info() to etls_ets_visibility_info() since the name of the protocol was changed from Enterprise TLS (eTLS) to Enterprise Transport Security (ETS).
This commit does not change the output to the terminal or to JSON/CSV, even though those outputs use the previous name of eTLS rather than ETS.
The ALPN GREASE test was written based on draft-ietf-tls-grease-01, which reserved all ALPN identifiers beginning with the prefix "ignore/". This commit changes the test to align with RFC 8701, which instead reserves {0x0A,0x0A}, {0x1A,0x1A}, ..., {0xFA,0xFA}.
Improved:
* readability of my old code
* readability of debugging statements
* honor $SNEAKY for SMTP greeting
* hook (arg2 to starttls_smtp_dialog() ), if we plan to add / replace SMTP greeting at some point
This is a legacy warning and seems only needed in a very few cases
whereas in other few cases we don't issue such warnings. So to be
consistent it's right to remove this message as it confuses users
unnecessarily,
It'll appear in debug mode though.
See https://github.com/drwetter/testssl.sh/issues/1119#issuecomment-656271849
As there as suggestions to check intermediate certificates for things such as expiration date, this commit saves the text versions of each of the intermediate certificates so that they are available to extract additional information.
This commit checks whether any intermediate certificates provided by the server include an extended key usage extension that asserts the OCSP Signing key purpose.
This commit replaces #1680, which checks for such certificates by comparing the server's intermediate certificates against a fixed list of known bad certificates.
* open: generation of intermediate certificate files. We do that
at several places. But for some reasons I do not understand currently
we remove those files.
* we don't name the offending certificate
run_cipherlists() checks for support for different groups of ciphers, but does not indicate which ciphers in each group are supported. So, for example, if the JSON file indicates that there is a problem with severity level "HIGH" because the "LOW" ciphers are available, there is no clear indication of which of these ciphers are supported by the server.
If run_server_preference() is run with "--color 3", then there will be a visual indication (via color) of the ciphers the server supports that are considered bad, but this information does not appear in the JSON (or CSV) output. The JSON (or CSV) output will include information about every cipher that is supported, but the severity level is always "INFO".
This commit addresses this problem by changing the fileout() calls in ciphers_by_strength() and cipher_pref_check() that output each supported cipher individually so that the "severity" argument is an indication of the quality of the cipher. With this, information about which bad ciphers are supported can easily be found in the JSON/CSV output.
When testssl.sh is called with an unknown option it prints something like:
0: unrecognized option "--option"
It should be printing the name of the program rather than "0". This commit fixes that.
This commit separates pr_cipher_quality() into two functions, one that returns the quality of a cipher as a numeric rating (get_cipher_quality()) and one that prints a cipher based on its quality (pr_cipher_quality()). This separation allows get_cipher_quality() to be used to determine how good a cipher is without having to print anything. Having this ability would be helpful in implementing the changes suggested in #1311.
Moved the sentence ~i "A grade better than T would lead to a false sense of security"
to the documentation. No reason for excuses in the output. ;-) Explanation fits
better in the doc.
See also #1657
PR #1373 changed get_cn_from_cert() to handle certificate subject names that include more than one CN attribute. It did this by converting newline characters to spaces. It seems that this resulted in a space character being added to the end of the string returned by get_cn_from_cert() even in the case that the subject name only included one CN attribute. The presence of the space character in returned value caused compare_server_name_to_cert() to determine that the CN attribute did not contain a DNS name (since DNS names cannot include spaces), and so compare_server_name_to_cert() reports that the server name does not match against the CN in the subject. This may be the reason for the problem noted in #1555.
This commit fixes the above problem and also enhances the matching of the CN in the subject name against the server's name. Currently, compare_server_name_to_cert() assumes that the subject field contains at most one CN attribute. However, as noted in #1373, some certificates include subject names with more than one CN attribute, and RFC 6125 (Section 6.2.2) indicates that the certificate subject name include more than one CN, with each specifying a different DNS name.
So, in addition to fixing the problem with the space character, this commit also enhances the CN matching to work even if the certificate includes more than one CN attribute in the subject name.
In some cases when the Trust finding is printed, there is no space between the results when SNI is used and the results without SNI (which appear in paraenthesis). This commit adds the missing space.
This commit fixes several issues related to Shellcheck issue SC2034: unused variables.
In most cases variables are declared in a function, but are referenced later. The exceptions are:
* SESS_RESUMPTION is declared and values are assigned to it, but it us never used. (Same applies for not_new_reused in sub_seession_resumption().)
* In run_cipherlists(), there is a typo in the declaration of sslv2_tdes_ciphers.
* In get_caa_rr_record(), "hash", "len", and "line" are used but not declared.
This commit adds a function for querying the TXT DNS record, so
that subsequently we'll can build on top of that a function for
checking MTA-STS, see #1073.
Also it modifies a local variable mxs in get_mx_record() which
was declared as mx but mxs was used. (That is pending an backport
to 3.0.)
This commit adds support for EdDSA (Ed25519 and Ed448). In particular:
* It modifies prepare_tls_clienthello() to include Ed25519 and Ed448 in the signature_algorithms extension of the TLS 1.2 and earlier ClientHello (RFC 8422).
* It modifies run_server_defaults() and get_server_certificate() to check whether the server offers EdDSA certificates with TLS 1.3.
* It modifies certificate_info() to handle certificates signed with EdDSA or with EdDSA public keys, even if $OPENSSL does not support pretty printing such keys and signatures.
* It modifies read_sigalg_from_file() to recognize EdDSA signatures even if $OPENSSL does not.
PR #1519 requested that testssl.sh show the signature algorithm that the server uses during the TLS handshake. In TLS 1.3, this appears in the CertificateVerify message. In TLS 1.2 it appears in the ServerKeyExchange message when the chosen cipher suite uses an ephemeral (DH or ECDH) key, except in the case of cipher suites that provide no authentication. This information is not present in TLS 1.1 and earlier, as the hash algorithm to use in these earlier versions of the protocol is hard coded into the specification.
This commit takes a first step towards being able to show the signature algorithm by extending parse_tls_serverhello() to extract the signature algorithm when it is present. Matching the output produced by OpenSSL, it output two separate lines, the "Peer signature type" (RSA, RSA-PSS, DSA, ECDSA, Ed25519, or Ed448) and the "Peer signing digest" (MD5, SHA1, SHA224, SHA256, SHA384, or SHA512). This will allow the same function to extract the signature algorithm and digest, whether the handshake was performed using "$OPENSSL s_client" or tls_sockets().
This commit fixes two issues related to $SHOW_SIGALGO.
First, cipher_pref_check() does not show the signature algorithm if any of the ciphers were found using tls_sockets(), since the call to tls_sockets() does not specify that the server's certificate should be extracted.
Second, in run_beast() the call to tls_sockets() indicates that the server's certificate should be extracted if "$SHOW_SIGALGO" is true, even if "$WIDE" is false. While this does not cause any problems, extracting the certificate is a waste of effort if "$WIDE" is false, since the signature algorithm is not shown in that case.
This commit saves more or less time for a detection of the compression.
First it assembles the GET command with all available compressions and send them all.
If the result is negative: we can just tell the finding and return. If it's
positive: We already have identified 1x compression. Then we cycle through the
remaining compressions with single GET requests.
In order to not duplicate code we introduced a helper function sub_breach_helper()
which takes care sending the request and analysis the result.
We treat now failed requests differently: When the first fails we don't
continue anymore.
This commit tries to enummerate through all possible compressions
instead of just raising the arm because of the first one detected.
As far as the performance is concerned there's room for improvements
which subsequent commits will address.
