This commit adds code to run_server_defaults() so that in debug mode all of the server's certificates are saved in $TMPDIR in both PEM-encoded format and pretty-print text format.
testssl.sh was recently changed to store the text printout of the host's certificate in a file, $HOSTCERT_TXT, and then use this file in some places rather than calling "$OPENSSL x509 -in $HOSTCERT -text -noout". There was a problem, however, in cases in which the server had more than one certificate (including cases in which the server returned an unrelated certificate when sent a ClientHello w/o SNI), since the contents of $HOSTCERT_TXT was not always being updated whenever $HOSTCERT changed.
This commit fixes that problem by replacing the previous solution with a less ambitious one. In this version, the global variable is eliminated and instead run_server_defaults() stores a text version of each certificate it finds in an array. This value is then passed to certificate_transparency() and certificate_info() for use. It is also passed from certificate_info() to must_staple().
determine_trust() uses the output of "$OPENSSL verify" to determine whether OpenSSL can construct a valid certification path for the server's certificate. If it does not find a string of the form "error [1-9][0-9]? at [0-9]+ depth lookup:" in the output, then it assumes that validation was successful. In current versions of OpenSSL, when this error is created it is printed to stdout, but in OpenSSL 1.1.1 is it printed to stderr. Since testssl.sh only checks the output sent to stdout, it incorrectly treats all certificates as valid if OpenSSL 1.1.1 is used.
This commit fixes the problem by checking the text that is sent to both stdout and stderr.
This commit also fixes a typo in the call to "$OPENSSL verify" which resulted in the environment variables SSL_CERT_DIR and SSL_CERT_FILE not being set to "/dev/null".
In ``must_staple()`` and ``certificate_info()`` were the jsonIDs
changed to OpenSSLi / IETF names so that testssl.sh is more compliant
to the rest of the world. There might be still space for improvements
are far as common naming scheme is concerned.
The host certificate is now being delivered in JSON and CSV. For
further usage " " needs to be converted back to linefeeds.
Certificate Expiration was renamed to Certificate Validity.
The order of outputting the certificate serial and SHA1 fingerprint
has been swapped.
Also ``certificate_info()`` makes more use of HOSTCERT_TXT.
For certificate start+end time it is now displaying the
time on UTC and without mentioning the timezone twice.
Also if neither CRL nor OCSP URI is provided it'll appear
on the screen below those two checks. JSON/CSV has then an
additional finding
HOSTCERT_TXT is now generated each time a HOSTCERT is
written. For now it is just being used in ``read_sigalg_from_file()``.
More to come.
Also in JSON output the start date and end date of the certificate
are now in separate objects. (the time format could need some polishing though).
In the output created by certificate_info(), the "Server key size" line labels an elliptic curve key as "ECDSA." This commit changes the label to "EC." I believe this a more correct label since ECDSA is a signature algorithm, not a key type. Also, while unlikely, an elliptic curve key in a certificate may be used for ECDH (e.g, in TLS_ECDH_RSA_WITH_AES_128_CBC_SHA) rather than ECDSA.
Note that this does not impact the JSON or CSV output, since the corresponding fileout command already uses "$cert_keysize EC bits"
This commit adds TLSv1.3 support for run_server_defaults(). It uses get_server_certificate() to run separate checks for RSA and ECDSA certificates by sending TLSv1.3 ClientHello messages with different signature_algorithms values. A similar change is made to certificate_transparency() in order to check for certificate transparency support for certificates returned over TLSv1.3. It also modifies the check for certificates offered without SNI by including an option to use tls_sockets() with servers that support TLSv1.3 if OpenSSL does not support TLSv1.3.
In TLSv1.3, if a HelloRetryRequest needs to be sent and the call to tls_sockets() includes additional request extensions (other than key_share or cookie), then resend_if_hello_retry_request() adds an extra comma between extensions in the value sent to socksend_tls_clienthello(), which creates errors. This commit fixes the problem by removing the extra comma.
``run_tls_fallback_scsv()`` was upgraded to the new scheme.
It also changes a couple of more functions using a variable ``$jsonID`` instead
of a repeating fixed value for `fileout()`.
Also some it adds some ``fileout`` calls which were missing.
In the sense of the previous commits this one adds
further changes to the JSON output parameters ID and findings.
Findings in JSON are now more crunchy and don't repeat parts
of ID. Also ID changed so that it is more reflecting what
has been tested.
As the cipherlist checks in the beginning have been less
and less to do with the OPsnSSL standard lists
a change to remove the word "standard" was long overdue.
That has been addressed now alos in the code and in the
JSON/CSV output.
$HOSTCERT has now an .pem file extension. $HOSTCERT_TXT
will contain the text putput of the x509 openssl operation
on the certificate which enables testssl.sh to remove
some of the redundant "openssl x509 -in $HOSTCERT -text"
calls.
fileout <somestrings> has not been consistently replaced
by fileout $jsonID yet.
This PR defines an extract_certificates() function in order to remove some redundant code from get_server_certificate(). Currently, nearly identical code appears in two places in get_server_certificate() to extract certificates from the output of `$OPENSSL sclient`, in one place for SSLv2 responses and in another for SSLv3 through TLSv1.2. The code to get the certificates used with TLSv1.3 (see https://github.com/dcooper16/testssl.sh/tree/extended_tls_sockets) would have added a third place where this same code would be needed. This PR allows the code to be written once and used in all three places.
This commit just adds more changes to those two parameters.
It is not completely done yet (see downgrade protection via SCSV).
Also json_prefix was changed to jsonID. The complete change of the fist
fileout field is pending.
The server default run had several JSON objects which weren't, looking at just
the ID, either clear or contained a redundant explanation in "finding". Purely
certificate related JSON objects are now having the id "cert_<object>" like
cert_CN or cert_SAN.
This commit changes all this, also it avoids another colon in finding (see #830).
Also the implicit strategy "output for the screen s followed by only one output with
fileout" has been relaxed -- which results on more, better parsable JSON objects.
Some example of the changes:
Old:
----
{
"id" : "Server Certificate #1 fingerprint",
"severity" : "INFO",
"finding" : "Fingerprints / Serial: SHA1 2940BC13ECF7DAF30B9084CC734C3B971D73B3BB / 01BFD1DC15006E0ABBA7C670FF5E1101, SHA256 30BA61012FFE7CEAAF9A148A0CB0C5C852A9C04F4B1C27DB6
EFA9919C7F49CCF"
}
[..]
{
"id" : "Server Certificate #2 ocsp_stapling",
"severity" : "OK",
"finding" : "OCSP stapling : offered"
}
New:
----
{
"id" : "cert_key_size <cert#1>",
"severity" : "INFO",
"finding" : "Server keys 2048 bits"
},{
"id" : "cert_fingerprint_SHA1 <cert#1>",
"severity" : "INFO",
"finding" : "2940BC13ECF7DAF30B9084CC734C3B971D73B3BB"
},{
"id" : "cert_fingerprint_SHA256 <cert#1>",
"severity" : "INFO",
"finding" : "30BA61012FFE7CEAAF9A148A0CB0C5C852A9C04F4B1C27DB6EFA9919C7F49CCF"
},{
"id" : "cert_serial <cert#1>",
"severity" : "INFO",
"finding" : "01BFD1DC15006E0ABBA7C670FF5E1101"
}
[..]
{
"id" : "OCSP_stapling <cert#2>",
"severity" : "OK",
"finding" : "offered"
}
This PR also fixes the JSON output where for "OCSP must staple" the id was just
'id" : "OCSP must staple: ocsp_must_staple",' for multiple server
certificates without the certificate number.
As far as the code is concerned: $json_prefix should be a variable which is
used for the id object. If there was more then one certificates for a single
host detected, $json_postfix carries the certificate number.
Unit tests need to be fixed -- if possible.
Add fileout() to #965. This commit also contains a change which needs
to be commited before: separation of ``json_prefix`` from ``json_postfix``.
Open issue: sed in openssl x509 statments look GNUish ([ \t]). Needs clarification.
This commit prints the contents of the keyUsage and extended key usage extensions in certificates and checks the public keys in the certificates are not being used in a manner that is inconsistent with these extensions.
This PR is intended to improve the functionality of run_tls_fallback_scsv().
The original goal of this PR was to address servers that support TLSv1.3 when using OpenSSL 1.1.1. That does not seem to be an issue, as using `$OPENSSL s_client` with the `-no_tls1_2` flag results in a TLSv1.1 ClientHello, even if `$OPENSSL` supports TLSv1.3. However, if the server supports TLSv1.3, then a message that says "No fallback possible, TLS 1.2 is the only protocol (OK)" isn't entirely correct.
The main issue this PR fixes is some false positives in servers that do not support TLSv1.2. On a few servers that I tested, the current code incorrectly reports "Downgrade attack prevention NOT supported." Some of the servers only support TLSv1, so it should report that fallback is not possible. Another server supports TLSv1.1 and TLSv1, and it supports fallback protection. In both cases, the current code produces a false positive, since it assumes that TLSv1.2 is supported.
Dirk
David Cooper
Alexandre Teyar
Jack Stevens