For certificate start+end time it is now displaying the
time on UTC and without mentioning the timezone twice.
Also if neither CRL nor OCSP URI is provided it'll appear
on the screen below those two checks. JSON/CSV has then an
additional finding
HOSTCERT_TXT is now generated each time a HOSTCERT is
written. For now it is just being used in ``read_sigalg_from_file()``.
More to come.
Also in JSON output the start date and end date of the certificate
are now in separate objects. (the time format could need some polishing though).
In the output created by certificate_info(), the "Server key size" line labels an elliptic curve key as "ECDSA." This commit changes the label to "EC." I believe this a more correct label since ECDSA is a signature algorithm, not a key type. Also, while unlikely, an elliptic curve key in a certificate may be used for ECDH (e.g, in TLS_ECDH_RSA_WITH_AES_128_CBC_SHA) rather than ECDSA.
Note that this does not impact the JSON or CSV output, since the corresponding fileout command already uses "$cert_keysize EC bits"
This commit adds TLSv1.3 support for run_server_defaults(). It uses get_server_certificate() to run separate checks for RSA and ECDSA certificates by sending TLSv1.3 ClientHello messages with different signature_algorithms values. A similar change is made to certificate_transparency() in order to check for certificate transparency support for certificates returned over TLSv1.3. It also modifies the check for certificates offered without SNI by including an option to use tls_sockets() with servers that support TLSv1.3 if OpenSSL does not support TLSv1.3.
In TLSv1.3, if a HelloRetryRequest needs to be sent and the call to tls_sockets() includes additional request extensions (other than key_share or cookie), then resend_if_hello_retry_request() adds an extra comma between extensions in the value sent to socksend_tls_clienthello(), which creates errors. This commit fixes the problem by removing the extra comma.
``run_tls_fallback_scsv()`` was upgraded to the new scheme.
It also changes a couple of more functions using a variable ``$jsonID`` instead
of a repeating fixed value for `fileout()`.
Also some it adds some ``fileout`` calls which were missing.
In the sense of the previous commits this one adds
further changes to the JSON output parameters ID and findings.
Findings in JSON are now more crunchy and don't repeat parts
of ID. Also ID changed so that it is more reflecting what
has been tested.
As the cipherlist checks in the beginning have been less
and less to do with the OPsnSSL standard lists
a change to remove the word "standard" was long overdue.
That has been addressed now alos in the code and in the
JSON/CSV output.
$HOSTCERT has now an .pem file extension. $HOSTCERT_TXT
will contain the text putput of the x509 openssl operation
on the certificate which enables testssl.sh to remove
some of the redundant "openssl x509 -in $HOSTCERT -text"
calls.
fileout <somestrings> has not been consistently replaced
by fileout $jsonID yet.
This PR defines an extract_certificates() function in order to remove some redundant code from get_server_certificate(). Currently, nearly identical code appears in two places in get_server_certificate() to extract certificates from the output of `$OPENSSL sclient`, in one place for SSLv2 responses and in another for SSLv3 through TLSv1.2. The code to get the certificates used with TLSv1.3 (see https://github.com/dcooper16/testssl.sh/tree/extended_tls_sockets) would have added a third place where this same code would be needed. This PR allows the code to be written once and used in all three places.
This commit just adds more changes to those two parameters.
It is not completely done yet (see downgrade protection via SCSV).
Also json_prefix was changed to jsonID. The complete change of the fist
fileout field is pending.
The server default run had several JSON objects which weren't, looking at just
the ID, either clear or contained a redundant explanation in "finding". Purely
certificate related JSON objects are now having the id "cert_<object>" like
cert_CN or cert_SAN.
This commit changes all this, also it avoids another colon in finding (see #830).
Also the implicit strategy "output for the screen s followed by only one output with
fileout" has been relaxed -- which results on more, better parsable JSON objects.
Some example of the changes:
Old:
----
{
"id" : "Server Certificate #1 fingerprint",
"severity" : "INFO",
"finding" : "Fingerprints / Serial: SHA1 2940BC13ECF7DAF30B9084CC734C3B971D73B3BB / 01BFD1DC15006E0ABBA7C670FF5E1101, SHA256 30BA61012FFE7CEAAF9A148A0CB0C5C852A9C04F4B1C27DB6
EFA9919C7F49CCF"
}
[..]
{
"id" : "Server Certificate #2 ocsp_stapling",
"severity" : "OK",
"finding" : "OCSP stapling : offered"
}
New:
----
{
"id" : "cert_key_size <cert#1>",
"severity" : "INFO",
"finding" : "Server keys 2048 bits"
},{
"id" : "cert_fingerprint_SHA1 <cert#1>",
"severity" : "INFO",
"finding" : "2940BC13ECF7DAF30B9084CC734C3B971D73B3BB"
},{
"id" : "cert_fingerprint_SHA256 <cert#1>",
"severity" : "INFO",
"finding" : "30BA61012FFE7CEAAF9A148A0CB0C5C852A9C04F4B1C27DB6EFA9919C7F49CCF"
},{
"id" : "cert_serial <cert#1>",
"severity" : "INFO",
"finding" : "01BFD1DC15006E0ABBA7C670FF5E1101"
}
[..]
{
"id" : "OCSP_stapling <cert#2>",
"severity" : "OK",
"finding" : "offered"
}
This PR also fixes the JSON output where for "OCSP must staple" the id was just
'id" : "OCSP must staple: ocsp_must_staple",' for multiple server
certificates without the certificate number.
As far as the code is concerned: $json_prefix should be a variable which is
used for the id object. If there was more then one certificates for a single
host detected, $json_postfix carries the certificate number.
Unit tests need to be fixed -- if possible.
Add fileout() to #965. This commit also contains a change which needs
to be commited before: separation of ``json_prefix`` from ``json_postfix``.
Open issue: sed in openssl x509 statments look GNUish ([ \t]). Needs clarification.
This commit prints the contents of the keyUsage and extended key usage extensions in certificates and checks the public keys in the certificates are not being used in a manner that is inconsistent with these extensions.
This PR is intended to improve the functionality of run_tls_fallback_scsv().
The original goal of this PR was to address servers that support TLSv1.3 when using OpenSSL 1.1.1. That does not seem to be an issue, as using `$OPENSSL s_client` with the `-no_tls1_2` flag results in a TLSv1.1 ClientHello, even if `$OPENSSL` supports TLSv1.3. However, if the server supports TLSv1.3, then a message that says "No fallback possible, TLS 1.2 is the only protocol (OK)" isn't entirely correct.
The main issue this PR fixes is some false positives in servers that do not support TLSv1.2. On a few servers that I tested, the current code incorrectly reports "Downgrade attack prevention NOT supported." Some of the servers only support TLSv1, so it should report that fallback is not possible. Another server supports TLSv1.1 and TLSv1, and it supports fallback protection. In both cases, the current code produces a false positive, since it assumes that TLSv1.2 is supported.
In three different places there is a line that is supposed to check whether the list of ciphers to be tested contains any TLSv1.3 ciphers. This check currently fails if there is only one TLSv1.3 cipher in the list and it is the first cipher in the list. This commit fixes the problem.
This commit adds support for draft 23, which contains 2 changes that are relevant for testssl.sh. It adds a few new values for the signature_algorithms extension and it changes to extension number for the key_share extension from 40 to 51.
With the change in the extension number, it is no longer possible to send a single ClientHello that works for all supported drafts of TLSv1.3. (I tried sending a ClientHello with two key share extensions, 40 and 51, but that didn't work.) So, this commit adds a test to determine_optimal_proto() to determine whether TLSv1.3 is supported and if so whether draft 23 is supported or only some earlier draft (18-22). In subsequent tests, the ClientHello uses the appropriate number for the key share (40 or 51) and specifies the appropriate draft version(s) in the supported_versions extension (either 23 or 18-22). In the case of run_protocols() the test for each draft version uses the appropriate key share extension number so that servers that support both draft 23 and an earlier draft can be detected.
This fixes a bug which prevented the script from running properly. Also
the commit restores writing a correct comment header. In addition it
adds TLS 1.3 ciphers.
support. If the server doesn't supply an session identifier the file
is just empty.
This commit fixes that by adding a separate case for OpenSSL 1.1.1
and an empty file. It is deliberately only changing this as this
was tested to work.
It is prelimary and a save-the-work-patch as it might be better
to catch this earlier.
Dirk
David Cooper
Jack Stevens
Cédric Tissières