This PR simplifies the code for determining which draft version of TLS 1.3 a server is offering by making use of a simple regular expression and $BASH_REMATCH rather than looping through every possible draft version.
PR #1463 changed run_ssl_poodle() to only run the test if it is known that the server supports SSLv3. However, support for SSLv3 may be unknown at the time run_ssl_poodle() is run (e.g., if the server supports TLS 1 and SSLv3, and run_ssl_poodle() is the first test performed). So, run_ssl_poodle() should perform testing unless it is known that SSLv3 is not supported.
There's a check for >825 days certificate lifetime. That
check emits a debug statement when the lifetime is within
this limit. It does that also when the certificate expired.
This commit adds now the word "total"
DEBUG: all is fine with total certificate life time
to make sure the life time left not is what should be understood.
Several vulnerability checks add a time penalty when the server
side only support TLS 1.3 as The TLS 1.3 RFC 8446 and implementations
known so far don't support the flaws being checked for.
This PR adds "shortcut" checks for all TLS 1.3, assuming that the
TLS 1.3 implementation is correct which seems at this time a valid
assumpution. That either saves a TCP connect or at least some logic to
be executed. Also in some cases a TLS 1.3 only server emitted unnecessary
warnings, see #1444.
If $DEBUG -eq 1 then it outputs information that a shortcut was
used. It doesn't do that in other cases because the screen output
seems too obtrusive.
It also adds a shortcut for beast when SSL 3 or TLS 1.0 is is known
not to be supported.
This commit radds 747fb039ed which
was accidenially reverted in 45f28d8166.
It fixes#1462.
See also #1459.
* Replace "! -z" with "-n"
* Replace "openssl' with "$OPENSSL"
* Redirect stderr output of $OPENSSL to /dev/null to supress "WARNING: can't open config file: /usr/local/etc/ssl/openssl.cnf" message (see #833)
* Remove unnecessary spaces from $GET_REQ11 string.
The CA browser form agreed on a validity period of 825 days or less
(https://cabforum.org/wp-content/uploads/CA-Browser-Forum-BR-1.5.3-redlined.pdf,
p4).
PR #1427 addressed that. However when an issuer signed/issued a certificate
with exactly 825 days, the check reported incorrectly that the life time
is too long.
This commit addressed that by adding a second to the calulation. Also the
output takes into account that it must be over ('>') 825 days, not '>='.
See #1070, kudos @poupas.
In addition it checks whether the first result was positive (in
terms of a finding). If so it does 4 rounds and checks the
result. So that other servers won't be penalized with 4 seconds.
derive-handshake-traffic-keys() uses the variables `derived_secret`, `server_write_key`, and `server_write_iv`, but they are not declared as local variables of the function. This PR fixes that.
As noted in #1273, there are some environments that will not allow writing to /dev/stdout. PR #1277 was an attempt to address that problem (along with an unrelated problem), but it appears that work on #1277 has been abandoned.
At the moment, "/dev/stdout" is only used as a parameter to asciihex_to_binary_file (in fact, most calls to asciihex_to_binary_file specify "/dev/stdout" as the file parameter). This PR removes the file parameter from asciihex_to_binary_file (and so renames it asciihex_to_binary). In most cases, this just means removing "/dev/stdout" as a parameter to the function. In the few cases in which a parameter other than "/dev/stdout" was provided to asciihex_to_binary_file, this PR just uses a redirect (">" or ">>") to accomplish the same result as providing the output file to asciihex_to_binary_file().
Note that #1273 and #1277 raised the issue of trying to write to /tmp, and this PR does not attempt to address that.
This PR fixes two problems that occur when testing a server that supports TLSv1.3 using OpenSSL 1.1.1 in --ssl-native mode.
First, when testing whether the server has a cipher order, the value of $sclient_success is checked after each call to tls_sockets(), but $sclient_success. As the goal is just to verify that the connection was successful (and didn't downgrade), $? can be checked rather than $sclient_success. [When not in --ssl-native mode, this problem is masked since $sclient_success is set to 0 earlier in the function.]
The second problem is that line 6646 tries to copy "$TEMPDIR/$NODEIP.parse_tls13_serverhello.txt", but this file is currently only created (on line 6287) if tls_sockets() is used to determine the negotiated protocol. This PR fixes the problem by also populating "$TEMPDIR/$NODEIP.parse_tls13_serverhello.txt" when OpenSSL is used to determine the negotiated protocol.
As stated in #1435 when specifying ``-connect-timeout=20`` AND
``--parallel`` there asa problem with the file handles of child
processes (__testssl.sh: line 10454: 5: Bad file descriptor__).
This commit mitigates that in a sense that both switches can't
be used together. There's a check now in parse_cmd_line().
In addition it addresses a problem when fatal() is called and
e.g. JSON files haven't been created yet (error message ~
__testssl.sh: line 825: : No such file or directory__). It
introduces a global CMDLINE_PARSED which remembers the state
whether ``parse_cmd_line()`` has been fully executed or
not. Only when the former is the case it allows writing to files.
That implies that in main parse_cmd_line() has to be followed
by json_header() and similar.
See #1429.
OpenBSD 6.6 had an offset with the HTTP header time of -3600 seconds.
This PR fixes that by adding the GMT time zone to parse_date()'s
HAS_FREEBSDDATE incarnation. That doesn't matter to FreeBSD.
Also now for older OpenBSDs the local and remote time are now
in the same format:
```
HTTP clock skew remote: Thu, 09 Jan 2020 12:52:32 GMT
local: Thu, 09 Jan 2020 12:52:02 GMT
``
so that a time difference is easier to spot.
OpenBSD's grep seems to interpret "-w <EXPR>:" differently
than Linux or MacOSX/FreeBSD in a sense that this doesn't
matchs, see #1430.
This PR fixes that by squashing the w option in all occuorrences.
In addition it removes the SOCKETHEADER if-statement which was
introduced looking forward a while back. It's not happening soon
at least and the variable was not initialized either.
... and reorder manpages also so that --warnings, --connect-timeout
and --openssl-timeout appear in the "input parameter" section.
The HTML manpage looks in the diff view quite different as previously
another computer was used for converting the source format with ronn(1).
The manpage in (g)roff format was manually edited with .RE / .RS
for provide indented bulletpoints.
See also #1419
* It'll be a warning now when a host certificate was issued after
March 1st, 2018 which has a lifetime >825 days, independent
whether it is an internal certificate or not. This can
change later, as browsers treat those certificates different
as "official ones"
* Still the 5 or 10 year threshold overrides this
* For older OpenBSDs there's now a better date format support
used in the expiration and validity period of a host certificate.
It mimics in bash the conversion of other date binaries. It is
not accurate so it might be off a day or at maximum two, probably
as a month has 30.42 days and not 30.
* The date output for OpenBSD is now in line with other OS. Previously
we just echoed the lines in openssl x509 output whereas now we
convert that
The expression 'grep -aw "Public-Key:"' hiccuped on the colon
under OpenBSD, so that any bitsize on a certificate had wrong
values, see #1425. (FreeBSD was fine)
This PR fixes that. It updates the expression by using awk and
bash internal functions.
The same problem occured in run_robot(). The strong typing of
pubkeybits had to be relaxed to a dynamic typing, unless we
choose to define a second string variable.
* old OpenBSD kinda works
* let's encrypt section moved so that OpenBSD can use it too
* Days are wrong
* Date format is not the same as with e.g. GNUdate (but should be)
* variables y m d not declared
* date warning for openbsd completely missing
As noted in #1418 LLMNR (Link-Local Multicast Name Resolution)
resolution times out when using x as an argument to "-connect".
This commit fixes that by replacing "-connect x" by "-connect invalid."
which is supposedly also generally more "DNS query friendly", see
https://tools.ietf.org/html/rfc6761#section-6.4 .
In addition this commit adds a check in get_common_prime() whether
the openssl version used has pkey support. If not with old openssl
versions and previously testssl.sh terminated after presenting garbledoutput.
(This was found as tested how very old version of openssl versions
handle "-connect invalid.")
If the server is known not to support TLS 1.3 (as well as TLS 1.2, TLS 1.1, and TLS 1), then mention TLS 1.3 in the list of not supported protocols. While lack of TLS 1.3 support is not part of the reason that no fallback is possible, it is part of the reason that the result is reported as prln_svrty_high.
If $high_proto is set to something other than SSLv3, support for SSLv3 will not have been determined by determine_optimal_sockets_params(), but it may have been determined later (e.g., by run_protocols()). So, this commit changes the loop to always check for SSLv3 support (without calling "$OPENSSL s_client" if $HAS_SSL3 is false). The check for whether the fallback test can be performed is moved until after the loop
