Currently, when `$DEBUG` is 2 and the connection is successful, `parse_tls_serverhello()` prints out information about the server's ephermal (EC)DH key, but nothing else. For example:
```
sending client hello... reading server hello...
dh_bits: ECDH, P-256, 256 bits
sending close_notify...
(183 lines returned)
```
This commit changes `parse_tls_serverhello()` so that information about dh_bits is only displayed if `$DEBUG` is at least 3, making it the same as for other information about the server's response.
In addition, it indents the printing of the information about dh_bits in order to better align with other information displayed at this debug level.
Update `$TLS12_CIPHER` to contain only 128 ciphers (so that it will work with servers that can't handle larger ClientHello messages), and also add some newer ciphers to `$TLS12_CIPHER`. Also define a `$TLS12_CIPHER_2ND_TRY` containing a list of 127 ciphers that do not appear in `$TLS12_CIPHER`. `$TLS12_CIPHER_2ND_TRY` is used in `run_protocols()` in order to perform a second test against servers that do not establish a TLSv1.2 connection when offered `$TLS12_CIPHER`.
In `run_protocols()` for TLS 1.2, try one set of 127 ciphers and if the result isn't a connection at TLSv1.2 then try another set of 127 ciphers before giving up and assuming that TLS 1.2 isn't supported.
The data for `run_client_simulation()` currently includes two clients that send version 2.0 CLIENT-HELLO messages (see Appendix E.2 of RFC 5246). Each of the CLIENT-HELLO messages advertises support for newer protocol versions (SSLv3 in the case of IE6XP and TLSv1.0 in the case of Java 6u45). A server may reject one of these version 2.0 CLIENT-HELLO messages, or it may respond with an SSLv2, SSLv3, or TLSv1.0 ServerHello.
The current code in `client_simulation_sockets()` assumes that the server's response with be an SSLv3 or later ServerHello. So, it can support cases in which servers respond with an SSLv3 or TLSv1.0 ServerHello (once PR #800 is accepted to undo the mistake in PR #797), but not cases in which servers response with an SSLv2 ServerHello.
This PR adds code to `client_simulation_sockets()` to check if the server's response is an SSLv2 ServerHello, so that it can process such responses with `parse_sslv2_serverhello()` rather than `parse_tls_serverhello()`.
When a connection is made using SSLv3 or later, `run_client_simulation()` will show to the protocol and cipher selected for the connection. With this PR, if the connection is made using SSLv2, `run_client_simulation()` will just show "SSLv2." In the case of SSLv2, the ServerHello contains a list of all ciphers that the server and client have in common, and it is up to the client to choose one. So, if the client and server have more than one cipher in common, more information about the client would be needed to know which cipher it would choose.
`std_cipherlists()` uses `has_server_protocol()` to determine whether to test for ciphers using SSLv2. However, this was resulting in false negatives due to #759. This PR removes the `has_server_protocol()` check so that SSLv2 is checked whenever the connection attempt with the TLSv1.2 ClientHello failed.
This PR fixes the extraction of the cipher suites in SSLv2 ClientHellos in `client_simulation_sockets()`. Since `client_simulation_sockets()` can only handle SSLv3 and above ServerHellos, it removes any SSLv2 ciphers and converts the other cipher from 3-byte format to 2-byte format.
This PR adds the same additional check to `client_simulation_sockets()` as was previously added to `tls_sockets()`. It extracts the list of cipher suites offered from each ClientHello and passes the list to `parse_tls_serverhello()` so that `parse_tls_serverhello()` can check that the cipher offered in the ServerHello was included in the ClientHello.
This assumes that a real client would abort the connection if it was presented with a cipher in the ServerHello that it didn't offer in its ClientHello.
According to a discussion thread on the IETF TLS WG mail list (see https://www.ietf.org/mail-archive/web/tls/current/msg19720.html), there is at least one TLS server that will fail if the last extension in the ClientHello has contains extension_data of length 0.
Currently, `tls_sockets()` will create such a ClientHello if:
* The padding extension is included, and the length of the ClientHello without the padding data would be between 508 and 511 bytes.
* No padding extension is included, and the caller provided `$extra_extensions` in which the last extension in `$extra_extensions` is empty.
* No padding extension is included, `$extra_extensions` is empty, no ECC cipher suites are offered, and the ClientHello is for TLSv1.1 or below (in this case the next protocol extension would be that last one).
This PR avoids the server bug (in nearly all cases) by ensuring the the padding extension (when present) always contains at least one byte, and by ensuring that when the padding extension is not present that the (non-empty) heartbeat extension is the last extension.
This PR does leave one possible scenario in which the last extension would be empty. If the caller provides an `$extra_extensions` in which the last extension in `$extra_extensions` is empty, `tls_sockets()` does not add a padding extension (or a padding extension is included in `$extra_extensions`), and `$extra_extensions` includes a heartbeat extension, then the last extension in the ClientHello would be empty. This, however, is a highly unlikely scenario, and certainly there are currently no such calls to `tls_sockets()` in testssl.sh.
As reported in #782, some servers will return a ServerHello with a cipher not listed in the ClientHello rather than than return an Alert, if the server does not support any of the ciphers listed in the ClientHello.
This commit modifies `tls_sockets()` to check whether the cipher in the ServerHello was one included in the ClientHello and to fail if it wasn't.
In `run_hpkp()` there is a call to `$OPENSSL s_client` that uses `${sni[i]}` as one of the command line options, but `sni` is not defined. My guess is that this was a copy/paste error from `run_client_simulation()`, which is the only function where an `sni` array is defined.
I am guessing that the intention was to use `$SNI` in `run_hpkp()`.
This PR attempts to address the outstanding issues with respect to issue #733, mainly by addressing the rules for when a certificate is obtained without SNI.
I believe I discovered the reason for issue #757: https://github.com/drwetter/testssl.sh/commit/f2303a0d79bc6f5c21181c0ed08ef5135abbeeeb.
This commit removed attempted to replace `$cbc_cipher_list_hex` (which was computed on the fly) with `$cbc_ciphers_hex` (which is static). However, the function was still using `$cbc_cipher_list_hex`, and since it wasn't being initialized to "" at the beginning of the function, the second call to `run_beast()` (to handle the second IP address) just appended to the value created by the first. Then, when the first two bytes were removed from the resulting string the result was a malformed cipher suite list, which caused `tls_sockets()` to fail.
This PR implements the suggestion from #753 for a child process in mass testing to send a signal to the parent to exit if the child encounters an error parsing its command line. At the moment, the child only sends the signal if it encounters an error that results in the `help()` function being called, but that could easily be changed (e.g., to also send a signal if `fatal()` is called in the child process).
In the case of parallel mass testing, the cleanup function needs to call `get_next_message_testing_parallel_result()` for the child that sent the signal, since otherwise the child's error message would not be displayed. Since I cannot tell which child sent the signal, I just call `cleanup()`, which displays the output of all completed child processes. Since the child process will send the signal almost immediately after starting, it can be assumed the that process that send the signal will be the last one that completed, and so its output will be displayed last (so it isn't hidden from the user).
Note that PR #753 is still needed, since there are still scenarios in which a child would not produce any JSON output, but the parent testssl.sh would not exit (e.g., the child process cannot open a socket to the server it is supposed to test). In additional, PR #754 would still be useful, since it would be more user friendly to catch the error in the mass testing file immediately (when possible) rather that partway through a potentially time-consuming testing process.
There is a bug in testssl.sh that occurs if mass testing is being performed, there is an error in the command line for one of the child tests, and either a single HTML file or a single JSON file is being created.
If mass testing is being performed and `parse_cmd_line()` detects an error in the command line for one of the child tests, then it will call `help()`, which will exit the program, resulting in `cleanup ()` being called. `cleanup ()` will call `html_footer()` and `fileout_footer()`. Since `html_header()` and `json_header()` have not yet been called, `$HTMLHEADER` and `$JSONHEADER` will both be `true, and so `html_footer()` and `fileout_footer()` will output HTML and JSON footers, even though no headers have been output.
This PR fixes the problem by having `help()` set `$HTMLHEADER` and `$JSONHEADER` to `false` so that no HTML or JSON footers are created.
A related problem is that if a single JSON file is being created, the parent process will insert a separator (a comma) into the JSON file between the outputs of each child process. However, if there is an error in one of the child process's command lines, then this child process will not produce any JSON output and so the JSON file will have two consecutive separators (commas), which is invalid according to http://jsonlint.com.
This PR provides a partial fix for the problem for parallel mass testing by checking whether a child process has created a non-empty JSON output before adding a separator to the JSON file. It leaves two unresolved problems:
* It does not fix the problem at all for `run_mass_testing()`, where the separator is added before the test with the command line error is run.
* It does not fix the problem for parallel mass testing for the case in which the first child test has a command line error.
This PR introduces the following changes/improvements to running mass testing in parallel:
* Continuous feedback is provided on the progress of testing, so that testssl.sh doesn't appeared to be frozen, even if it is waiting a long time for a child test to complete. [The feedback text is sent to `stderr` so that it doesn't appear in the log file if the `--logging` option is used.]
* Text sent to `stderr` by a child test is captured and then displayed in context with the appropriate test rather than being displayed at the time the error occurs. [Note that this means that if the `--logfile <logfile>` option is used (with `logfile` being the name of a file), then `logfile` will include both `stdout` and `stderr`.]
* If a test is started but it does not complete (because testssl.sh was stopped or because the test timed out), then a message is displayed indicating that the test didn't finish.
I believe that `run_mass_testing_parallel()` is either ready for use or nearly ready for use. So, I changed the program to use `run_mass_testing_parallel()` rather than `run_mass_testing()` if the `$EXPERIMENTAL` flag is set.
When the `--log`, `--logging`, or `--logfile <logfile>` option is being used and testssl.sh is stopped, a "printf: write error: Broken pipe" message tends to appear. From what I can tell, this is a result of the `tee` process being killed before the `cleanup ()` function completes. At the moment, `cleanup ()` doesn't write very much to `stdout`, but if parallel mass testing is performed, then `cleanup ()` may try to write the results of several previously completed tests.
This PR fixes the problem by adding the `-i` option ("ignore interrupt signals") to `tee`.
Note that I have tested this on a Linux desktop and an OS X laptop, but don't have a MS Windows computer on which to test this change.
This PR provides improvements to `run_mass_testing_parallel()`. Currently, `run_mass_testing_parallel()` treats `$MAX_PARALLEL` as the maximum difference between the number of the test whose results were last processed and the number of the most recently started test. This means that test #40 will not be started until the results of test #20 have been processed. I've encountered situations in which tests 21 though 39 have completed, but test #20 is still running, and so no new tests are started.
This PR fixes the problem by checking the status of all running child tests to see if any are complete, rather than just looking at `$NEXT_PARALLEL_TEST_TO_FINISH`. This prevents one slow child test (or a few slow child tests) from slowing up the entire mass testing process.
This PR also changes the basis for determining whether a slow child process should be killed. Rather than waiting `$MAX_WAIT_TEST` seconds from the time that the parent started waiting (which is rather arbitrary), it kills the process if `$MAX_WAIT_TEST` seconds have passed since the child test was started. Given this, and that the above change makes it less likely that a slow child test will slow up the overall testing, I increased `$MAX_WAIT_TEST` from 600 seconds to 1200 seconds.
I added some `debugme` statements that provide feedback on the status of testing, but in non-debug mode there may be a perception issue. If one test (e.g., test #20) is very slow, testssl.sh will not display any results from later tests until the slow test finishes, even though testssl.sh will continue running new tests in the background. The user, seeing no output from testssl.sh for an extended period of time, may think that testssl.sh has frozen, even though it is really just holding back on displaying the later results so that the results will be displayed in the order in which the tests were started.
There is a comment in the `run_client_simulation()` function that says "FIXME: printf formatting would look better, especially if we want a wide option here."
This PR is an attempt at addressing that FIXME and adding a wide option. The proposed wide option prints the same information as the non-wide option, just with the columns aligned. I didn't add any of the additional information that is displayed by other functions in wide mode, since I thought that made the output too wide.
* Changed calls to testssl.sh to not include `--quiet` or `--append` flags. Modified perl script to remove HTML header and footer before comparing to terminal output.
* Changed `TERM_WIDTH` to 120 (doesn't affect test, but 80 created too much line wrapping).
* Replace date and time information with X's rather than removing entirely. This should not affect the comparison, but will make the output created displayed in an error message look closer to the actual output of testssl.sh
I've never programmed in perl before, but this script seems to work. It includes two checks:
* I runs testssl.sh without the `--debug` flags and checks that the HTML file is the same as what is sent to the terminal.
* It runs testssl.sh with `--debug 4` and checks that the HTML file created is the same as the one created without the `--debug` flag.
`emphasize_stuff_in_headers()` only adds color to the text being printed to the terminal if `$COLOR` is 2. So, the same should be the case for the HTML output.
This PR addresses issue #616, changing `run_cipher_match()` so that only those ciphers that are available are shown, unless the `--show-each` flag has been provided.
It also fixes a problem where the signature algorithm isn't being shown, even if `$SHOW_SIGALGO` is true.
This PR just addresses some places where quotes need to be used to avoid word splitting in case the referenced file, or path to the file, contains space characters.
The previous fix did not work if testssl.sh was found via `$PATH`. This seems to work in all cases. If testssl.sh is found via `$PATH` or if the command line includes a path, then `which` returns a non-empty response; otherwise, `$0` does not include any path, but one needs to be provided, so `$RUN_DIR/$PROG_NAME` is used.
Using "$0" as the name of the executable seems to work as long as "$0" contains a directory name (e.g, "workingfiles/testssl.sh"), but not if it is just the name of the executable (e.g., "testssl.sh"). Specifying "$RUN_DIR/$PROG_NAME" seems to work in both cases, since if "$0" doesn't contain any path information, `$RUN_DIR` is `.`
Use the suggestion "If you want to print the argument list as close as possible to what the user probably entered" from http://stackoverflow.com/questions/10835933/preserve-quotes-in-bash-arguments to create `$CMDLINE` and to print the command lines in `run_mass_testing()` and `run_mass_testing_parallel()`.
This PR addresses issue #702. Rather than create the command line for each child process in `run_mass_testing()` as a string, it creates it as an array, with each argument being a separate element in the array. This was done based on http://mywiki.wooledge.org/BashFAQ/050.
The printing of each child's command line done based on http://stackoverflow.com/questions/10835933/preserve-quotes-in-bash-arguments.
The `$CMDLINE` string remains unchanged, even though it isn't entirely "correct," since http://jsonlint.com/ complains if the "Invocation:" string contains backslashes.
I was doing some testing on my extended_tls_sockets branch and discovered that it was not fully working since the `TLS13_KEY_SHARES` array was empty. According to https://lists.gnu.org/archive/html/bug-bash/2012-06/msg00068.html, there is an issue when trying to initialize a global array inside a function. (The current code initializes `TLS12_CIPHER`, `TLS_CIPHER`, and `TLS13_KEY_SHARES` within `get_install_dir()`, since tls_data.txt is read in that function.) In fact, according to http://stackoverflow.com/questions/10806357/associative-arrays-are-local-by-default, in order to initialize a global variable in a function, one needs to provide the `-g` option, which was only added in Bash 4.2.
This PR seems to fix the problem by moving the reading of tls_data.txt to the main body of the code rather than reading it within the `get_install_dir()` function.
If I understand correctly how `run_hpkp()` should be displaying the list of Backups, the problem shown in the photo attached to #696 occurred because the dangling SPKIs should have been printed on the next line. This PR fixes this by changing the code that prints out the "good" backups to include a newline after printing the CA's name.
Another problem this PR fixes is that `tm_italic()` is being called instead of `pr_italic()`, meaning that the italicized text is being printed to the terminal, but is not being included in the HTML output.
Finally, this PR fixes errors in the definitions of `tmln_italic()` and `prln_italic()`. `tmln_italic()` calls `outln()` and `prln_italic()` calls `tmln_out()` instead of the reverse.
This PR fixes issue #695 by changing the call to `out_row_aligned_max_width()` so that the length of the flag is considered in determining the length of the first line of the output.
This PR fixes two issues with HTML generation that were introduced by a commit on March 31, 2016, "[count_ciphers is now un-sed'ed, minor improvements](https://github.com/drwetter/testssl.sh/commit/a480e5f699983207651aa0a8717dc395d13e6e52)."
The first is that in `std_cipherlists()`, `[[ $DEBUG -ge 1 ]] && outln " -- $1" || outln` was changed to `[[ $DEBUG -ge 1 ]] && outln " -- $1" || outln`. The result being that in the HTML output, all of the tests from `run_std_cipherlists()` appear on the same line. This PR changes the line to:
```
[[ $DEBUG -ge 1 ]] && tm_out " -- $1"
outln
``
so that the line break is added to the HTML output, but the debugging information is not.
The second problem is that the commit on March 31 moved the call in main to `html_header()` until after the calls to `get_install_dir()`, `find_openssl_binary()`, `mybanner()`, `check4openssl_oldfarts()`, and `check_bsd_mount()`. The problem is that each of these functions may call an output function that will call `html_out()`.
If `html_out()` is called before `html_header()` and the command line contains `--htmlfile <htmlfile>`, then "htmlfile" will be written to before `html_header()` is called and then `html_header()` will warn that "htmlfile" already exists and then exit the program.
If `html_out()` is called before `html_header()` and the command line contains `--html`, then anything send to `html_out()` before `html_header()` is called (such as the banner) will not appear in the HTML file.
I did some testing with http://jsonlint.com/ and discovered a missing comma when massing testing is being performed and a single JSON file is being created.
In `run_server_defaults()` the variable `success` is defined twice, once an an ordinary variable and once as an array. The PR removes the incorrect definition. It also removes the definitions of some variables that are no longer used and reorganizes the definitions so that each line has only one variable type.
I also noticed a typo later in `run_server_defaults()` and corrected it.
This PR introduces the environment variable `CHILD_MASS_TESTING`, and uses it as an indicator that testssl.sh is running as a child within mass testing rather than using the `$APPEND` flag. It also makes a number of other changes to make the handling, of HTML, CSV, JSON, and log files consistent, and it fixes a number of bugs related to the generation of these files when mass testing is being performed.
Please let me know if you disagree with any of the changes in this PR, or if you would prefer that it be broken up into multiple smaller PRs.
Some of the changes are as follows:
- When the `$APPEND` flag is true, all of these files are appended to and headers and footers are omitted. (Perhaps this should be changed. Appending to a log file isn't an issue, but appending to a JSON or HTML file without including headers or footers seems to just create an improperly formatted file).
- Following the code in `prepare_logging()`, an error is printed and the program stops if the `$APPEND` flag is false and one of the files to be written to already exists.
Some of the bugs fixed:
Creating log files did not work with mass testing:
- If `--logfile <logfile>` is used, then the parent and each child try to write to "logfile".
- If `--logging` is used, then a log file is created for each child, but an oddly-named log file is also created for the parent. The one created by the parent contains the entire output.
Plain JSON files:
- When `--jsonfile <jsonfile>` is run, there is no comma separating the final finding for one child and the first finding for the next child.
Pretty JSON files:
- When `--jsonfile-pretty <jsonfile>` is called without mass testing, the "target host" line is empty, since `$NODE` has not yet been set.
- When `--jsonfile <jsonfile>` is run with mass testing, there is no comma separating the final finding for one child and the first finding for the next child. In addition, `fileout_pretty_json_banner()` is never called, and the entries for individual tests have insufficient information to determine what is being tested (it lists "service" and "ip", but not port number).
For the final issue, when mass testing is being performed and all output is being placed in a single file, I have the parent call `fileout_pretty_json_banner()`, but tell `fileout_pretty_json_banner()` to not include a "target host" or "port", but then have each child include a "target host" or "port" (when the "service" and "ip" are being printed).
This PR improves `out_row_aligned_max_width()` in a few ways:
* It makes better use of bash's string manipulation capabilities in order to simplify the function.
* It improves the function's performance. One of the most costly parts of `out_row_aligned_max_width()` was the while loop to print each entry in the text. Since there is only one place in the code where the the entries are not all printed the same ways (the list of supported curves printed by `run_pfs()`), the PR changes `out_row_aligned_max_width()` to just return a plain text string, which the calling function prints in the appropriate way. For the curves printed by `run_pfs()`, a new function, `out_row_aligned_max_width_by_entry()` takes care of getting the output from `out_row_aligned_max_width()` and then printing each entry appropriately.
* The PR also introduces a trick so that when the TLS extensions are printed, the text for an extension won't get split across two rows. It does this by replacing the space charters within the text for an extension with "}", formatting the result with `out_row_aligned_max_width()`, and then converting the "}" back to space characters.
`$OPENSSL_LOCATION` is used in `fileout_pretty_json_banner()`, `html_banner()`, `mybanner()`, and `prepare_logging()`, but the value of `$OPENSSL_LOCATION` is populated in `mybanner()`. This is usually okay, since `mybanner()` is always called before the other three functions are called. However, if `$QUIET` is `true`, then `mybanner()` returns immediately, without populating `$OPENSSL_LOCATION`, even though the value of `$OPENSSL_LOCATION` may be needed by one or more of the other functions.
This PR addresses this problem by populating `$OPENSSL_LOCATION` in `find_openssl_binary()` rather than `mybanner()`.
With the commit made on March 26, "partly (1/2) fixing #653," an HTML banner isn't added to the HTML files anymore. A banner should be added to the top of the HTML file if mass testing is being performed and a separate HTML file is being created for each test.
The `$APPEND` flag being `true` is an indicator that mass testing is being performed and that this is one of the individual tests being run. Given that `$APPEND` is `true`, `$HTMLHEADER` being `true` indicates that testssl.sh is creating the file name for the HTML output. So, it is when both flags are `true` that the HTML banner should be created.
`std_cipherlists()` does not include line breaks between tests in the output to the terminal when `$DEBUG` is 1, and it does not include line break between tests in the HTML output whenever `$DEBUG` is greater than 0.
In `create_client_simulation_tls_clienthello()` the variable `sni_extension_found` should be set if the ClientHello includes an SNI extension. Instead it was being set if and only if the ClientHello included some extension other than SNI.
This bug wasn't detected before for two reasons:
* It is rare to have a ClientHello that includes an SNI extension, but no other extensions.
* The code still works correctly if `sni_extension_found` is set even if there is no SNI in the ClientHello.
So, the bug only creates a problem if the browser's ClientHello include an SNI extension and no other extensions (see "BingPreview Jun 2014" in the client_simulation branch).
When HTML output is not being created, the print functions last step is to call `html_out()`, which responds to `return` rather than `return 0`. This causes problems for lines of code that rely on receiving a return value of 0. For example:
```
[[ $VULN_COUNT -le $VULN_THRESHLD ]] && outln && pr_headlineln " Testing for LUCKY13 vulnerability " && outln
```
This PR fixes two minor bugs:
* In `run_hpkp()`, the call to `$OPENSSL s_client` includes the option `-showcerts` twice. This PR removes one of them.
* In `get_server_certificate()`, the first call to `$OPENSSL s_client` includes `$addcmd`, but `$addcmd` has not yet been initialized. Instead, `$SNI` should be used.
